Please choose first the "Version" and the "Build" to see the price and more details on your choice . Then you'll be able to put your product into the basket.

Ventus-3

• Worldwide shipping
  
• Tripple carbon wings
  
• Hard Shell wings
• Large aramid-reinforced fuselage
  
• Chassis included and fully installed
  
• Cockpit glued and painted including cockpit lock
  
• Ready wiring harness for fuselage and wings

Gliding at it's best. Our Ventus 3 impresses with high quality workmanship, very nice all-round flight characteristics and handy size.

The model is also available with a folding impeller (self-launching) and a folding propeller. The wings and tail units are made of full carbon hard shell. As known standard in our scalers, the fuselage is made of a fiberglass / carbon / aramid construction to ensure maximum durability over a long period of time.

For landing we recommend the use of the flaps and, in addition, the use of the spoilers. This combination offers excellent braking and descent effects without the model becoming critical in handling.

The pack size is only 1.8m

References/Videos:

• Ventus-3 4.8m - Fun at Teck - Germany
• Ventus-3 4.8m - Spring Flying Norway
• Easy Ground Launch with FES Landing Gear
• Another easy Ground Launch
• Test-Flugmodell
• Marvins Slope Fun at Kirchheim Teck
• Ventus-3 4.8 m - Colli di San Fermo - Thermal flight
• Flying Circus Fiss Austria
  
• Drone Persecution
• Ventus-3 4.8m - Colli di San Fermo - Peter
• Ventus-3 (4.8m) Recommendation - For Swiss people only!
• Video from Jan and Marvin about our Ventus-3 and Ventus-2c
• Ventus-3 - 4.8m - Rolf Kessler at Colli di San Fermo
• Ventus-3 - 4.8m and 6.0m - Colli di San Fermo
• Ventus-3 - 4.8m - Marvin at Jets & Props - Donauwoerth - Germany
• Test-Modelfly-Norway
• Ventus-3 4.8m and 6.0m - Nose dives
• Ventus-3 4.8m - Tripple Carbon Hardshell

Version:

• Glider
  
• Electro (FES)
  
• Impeller (EDF)

Build:

• Standard Kit: All standard parts incl. wiring harness
  
• Full Build Kit (Glider): Standard kit + servo set, battery and magnetic switch
• Full Build Kit (Electro): Standard kit + servo set, impeller, controller and motor-battery
  
• Full Build Kit (Impeller): Standard Kit + servo set + mechanical retraction+ EDF + controller + battery
• Read To Fly: Full Build Kit + complete assembly of the aircraft by us within a few days!
  

Classification:

• Easy to build..........⭐⭐⭐⭐
• Easy to set up........⭐⭐⭐⭐
• Easy to fly..............⭐⭐⭐⭐⭐
• Speed.................... ⭐⭐⭐⭐
• Thermal................. ⭐⭐⭐⭐⭐
• Agility..................... ⭐⭐⭐⭐

Technical data:

• Wingspan: 4.780mm
• Wing area: 78 dm²
• Center of gravity: 75mm
• Flight weight: 7.600g

• Scale: 1:3,75
• Airfoil: HQ 2,5 mod

Controls:

• Elevator
  
• Rudder
  
• 2x Ailerons
• 2x Flaps
• 2x Airbrakes
• retractable landing gear

Wings and tailplane:

• High strength gel-coat carbon wings in sandwich build
  
• Clean, high quality processing
• Painted in the mould

Fuselage:

• High strength gelcoat glass/carbon/aramid fuselage
  
• Clean, high quality processing
• Painted in the mould
• Clean Canopy

Accessories included:

• Installed landing gear
• Glass canopy (glued and painted)
• Glass servo covers Servo support plate (fuselage)
• High quality clevis made of spring steel ⭐
  
• Pre-assembled and encapsulated wiring harness ⭐
  

Further recommended accessories:

• Fitting servo set (available here in the shop) ⭐
  
• Magnetic switch (available here in the shop) ⭐
  

Servo recommendation:

• Elevator: KST X15-1208
• Rudder: KST X15-1208
• Aileron: 4x KST X10
• Flaps: 2x KST X10
• Airbrakes: 2x KST X10 mini
• Landing gear: KST BLS 651
• Note our low-priced servo sets in the accessories area! ⭐
  

Rudder Setup:

• Elevator: 10 mm up / down
  
• Rudder: 25 mm left / right
• Aileron: 10 mm up, 6 mm down
• Flaps: 20 mm down, 4 mm up

Butterfly/Landing:

• Flaps: full down

• Airbrakes: full brake

(All mm data measured at the position of the largest deflection of the rudder)

Information about motorization:

• Motor: Hacker A40-10L V4 14-Pole kv500
• Controller: PowerBEAST C80 Basic
• Battery: Hacker TopFuel LiPo 20C ECO-X 3000mAh 4S MTAG
  
• Propeller: GM Scale CFK white 17x10
• Spinner: GM Scale CFK white

Impeller:

• MigFlight JETEC E-80 Impeller 6-8S
• Motor: Leomotion 1900kv
  
• Controller: Hacker MasterSPIN 160 Pro BEC
• Battery: Hacker TF Power-X 5000-6S MTAG

Building description:

• Manual

Tip for experienced pilots: reduce the difference in angle 0.3 degrees and the Ventus-3 becomes a racing machine!

More Ressources:

• Composite RC Gliders Knowledge Base
  
• CRG Youtube Channel
• Instagram
• Newsletter

✉ info@composite-rc-gliders.com

☎ +49 2405 4067752